Tools Needed: Masking Tape Wood Glue Craft Knife or Sand Paper Always do a dry assembly with only masking tape before you use wood glue!
Parts List
Before you begin, Lay out all of your parts to ensure you have the correct parts for this module. Some Modules have similar parts, so if you've purchased multiple units, this step is essential.
Assemble the Drawer (Twice)
Use masking tape to hold everything together while you wait for the wood to dry
Insert Foot strip to the underside of the base plate
This part is very delicate, so be careful when inserting and removing.
Insert Centre rib to the top side of the base plate
Attach side panels
Attach back panel
Attach Top Plate
Glue registration blocks onto the top plates, lining up with the etch lines provided
This step isn't neccessary if you never intend to stack the unit with others.
