3 Drawer Storage Module

3 Drawer Storage Module
Tools Needed:
Masking Tape
Wood Glue
Craft Knife or Sand Paper
Always do a dry assembly with only masking tape before you use wood glue!
Masking Tape
Wood Glue
Craft Knife or Sand Paper
Always do a dry assembly with only masking tape before you use wood glue!

Parts List
Before you begin, Lay out all of your parts to ensure you have the correct parts for this module. Some Modules have similar parts, so if you've purchased multiple units, this step is essential.

Assemble the Drawer (Three times)

Use masking tape to hold everything together while you wait for the wood to dry

Insert Foot strip to the underside of the base plate
This part is very delicate, so be careful when inserting and removing.

Insert short centre ribs into long centre rib

Insert this assembly into the base plate

Insert Lid supports into the rear of the centre assembly

Attach back panel

Attach side panels

Attach Top Plate

Close the rear compartment with the lid

Glue registration blocks onto the top plates, lining up with the etch lines provided
This step isn't neccessary if you never intend to stack the unit with others.